Friday, February 22, 2013

#Fukushima I Nuke Plant: Gamma-Ray Camera Image of Reactor 2 Operating Floor


As the new LDP administration under Shinzo Abe is very eager to be done with the Fukushima nuclear accident by urging TEPCO to do the decommissioning work way ahead of schedule (which is not feasible even its current form), TEPCO dutifully follows the government prompting (which is tantamount to an order without saying it is an order).

The effort to do things ahead of schedule, or to catch up on the behind-schedule work, has already resulted in dropping a fuel transfer machine part into the Spent Fuel Pool in Reactor 3 as the workers carried out the work in heavy snow.

Now, TEPCO just did the gamma-ray imaging of the Reactor 2 operating floor. Although the Reactor 2 building looks intact except for the open blowout panel, the radiation levels on the operating floor is just too high for the carbon-based or silicon-based workers. The lowest level is 40 millisieverts/hour, the highest 880 millisieverts/hour right above the reactor well, as mapped by the robot Quince No.2 in June last year.

What TEPCO did therefore was to build a platform on top of the turbine building to the height of the blowout panel, and lifted up the gamma camera onto the platform using a crane.

TEPCO says the analysis will take about a month.

From TEPCO's Photos and Videos Library, 2/22/2013:


According to the handout that accompanies the photo, TEPCO plans to "decontaminate" the floor whose air radiation doses are as high as 880 millisieverts/hour in order to remove fuel assemblies from the Spent Fuel Pool in the "future".


At a much lower air dose level of about 10 millisieverts/hour, Quince No.1 robot has been stranded on the 3rd floor of Reactor 2 since October 2011.

I have no idea how "decontamination" is possible.

3 comments:

Anonymous said...

As long as the core melt has slowed it off gassing or is contained somehow maybe submerged underwater, the fallout on the walls, ceilings and working floor can be washed, vacuumed, scrubbed, scrapped, coated, plated over, encased and the air filtered. Then they incinerate the cleanup waste sending it elsewhere in the environment but maybe then they can then hop on the refueling machine and unload the pool.

Have bots start out cleaning the place for a couple years and maybe humans can takeover.

Anonymous said...

Bet they decide bots are too expensive or fail in radiation. So Tepco will use foreign labor/carbon lifeforms or draft workers. No Immediate Danger of course!

JPG4PNG said...

This is the first time I came here and I will show everyone a utility tool called: jpg4png.comto help convert the jpg image to the simplest png.

Post a Comment